Jet Products - Jet Build, Repair, Sale, Service - Australia - New Zealand
PO Box 26
Inverell, NSW 2360
ph: 0405767764
jetprodu
Adapter to connect the telemetry data from XICOY, JetCentral, Wren, Kingtech and JetsMunt ecus that use a servo lead on data terminal connection to JETI, FUTABA, MULTIPLEX, HoTT and JR DMSS. Supports several engines on the same receiver except Hott.
Ecus V6 and older (connector RJ45 8 pin) not supported.
Supports Futaba MZ18 and SG14. Robbe Telemetry Box not supported. JetiBox supported, inclusive alarms.
Translates all relevant parameters (RPM. EGT, battery, Pump, Throttle and remaining fuel) from the ecu to the TX, where they can be recorded and alarms set.
If used on JETI and Hott radios, it provides full emulation of the ecu data terminal to access to all ecu functions, and to monitor the startup of the engine. Keystrokes of the buttons on the transmiiter are sent to the ecu to allow the navigation through all the menus on the ecu.
On Futaba radios the measures of the received signal strenght and failsafe counter are transmitted to the TX for a evaluation of the quality of the radio link and to set a alarm if link became marginal.
AUD$60.00 inc GST
Adapter to replace the data terminal of the Xicoy ecus by a wireless smartphone app. Compatible with iPhone from version 4S and Android from version 4.3.
Supports all the operations offered by the standard data terminal, including buttons, plus graphics. Ideal to monitor the engine startup on the plane with the hatch closed.
Smarthphone app included in the price.
Android: Google Play
IOs (Appstore): Apple Appstore
Note: Bluettooh range is reduced, cannot be used to monitor the engine during flight
AUD$72.00 inc GST
Flight computer for Xicoy V10 Fadecs. Basic version.
Features:
• 2.4” full color touchscreen display, high quality, sunlight readable.
• Connection to the Xicoy fadec to collect the engine data and display in graphical form
• GPS module connection (option) to collect the coordinates, ground speed, date, time and altitude.
• 3 axis accelerometer to measure the G load in all 3 axis.
• Barometer/altimeter/termometer. Measures barometric altitude and air density to calculate the engine performance.
• Telemetry output to send all the data trough the telemetry link of the radio. Currently supported Jeti, Futaba, HoTT and Multiplex.
• uSD card to store all measures from sensors, battery voltage, engine data, Supplied with a card capable of 2.000 hours of recording, one set of data each 0,5.
Data analyzable by a supplied computer software and exportable to Excel and Google Earth.
• Software updatable trough the uSD card.
Includes lead and uSD memory card.
NOTE: Does not include the pressure sensor for pitot airspeed. Basic units cannot be upgraded to add this feature.
AUD$213.00 inc GST
Flight computer for Xicoy V10 Fadecs.
Features:
• 2.4” full color touchscreen display, high quality, sunlight readable.
• Connection to the Xicoy fadec to collect the engine data and display in graphical form
• GPS module connection (option) to collect the coordinates, ground speed, date, time and altitude.
• 3 axis accelerometer to measure the G load in all 3 axis.
• Barometer/altimeter/termometer. Measures barometric altitude and air density to calculate the engine performance.
• Airspeed pressure sensor to measure the airspeed using a pitot tube.
• Telemetry output to send all the data trough the telemetry link of the radio. Currently supported Jeti, Futaba, HoTT and Multiplex.
• uSD card to store all measures from sensors, battery voltage, engine data, Supplied with a card capable of 2.000 hours of recording, one set of data each 0,5s.
• Output for 2 high power LED, to visually show the airspeed during landing.
Data analyzable by a supplied computer software and exportable to Excel and Google Earth.
• Software updatable trough the uSD card.
• Includes lead and uSD memory card
NOTE: Does not include the Pitot tube.
AUD$258.00 inc GST
For use with Xicoy V10 ECU with Jetcat V10 ECU compatibility in development
Features:
• 2.4” full color touchscreen display, high quality, sunlight readable.
• Connection to the Xicoy fadec to collect the engine data and display in graphical form
• GPS module included to collect the coordinates, ground speed, date, time and altitude.
• 3 axis accelerometer to measure the G load in all 3 axis.
• Barometer/altimeter/termometer. Measures barometric altitude and air density to calculate the engine performance.
• Airspeed pressure sensor to measure the airspeed using a pitot tube.
• Telemetry output to send all the data trough the telemetry link of the radio. Currently supported Jeti, HoTT and Multiplex.
• uSD card to store all measures from sensors, battery voltage, engine data, Supplied with a card capable of 2.000 hours of recording, one set of data each 0,5.
• Output for 2 high power LED, to visually show the airspeed during landing.
Data analyzable by a supplied computer software and exportable to Excel and Google Earth.
• Software updatable through the uSD card.
Includes lead and uSD memory card.
AUD$345.00 inc GST
Xicoy Air Speed Pitot to suit Flight Computer
Xicoy GPS Receiver - Suit Flight Computer
Jet Products - Jet Build, Repair, Sale, Service - Australia - New Zealand
PO Box 26
Inverell, NSW 2360
ph: 0405767764
jetprodu